Products
Industrial WWTP & Wastewater Systems
An industrial WWTP integrates physical separation, biological and chemical treatment, sludge handling, commissioning, and controlled operating support
How should a buyer select an industrial WWTP?
An industrial WWTP should be selected from wastewater character and load, average and peak flow, the effluent target, space, utilities, and operator capability. PT Beta Pramesti Asia connects these inputs to physical separation, biological or chemical treatment, sludge handling, commissioning, and acceptance evidence.
| Buyer input | WWTP decision affected |
|---|---|
| Wastewater sources, flow, production pattern, and seasonal variation | Equalisation, hydraulic capacity, pumps, number of trains, and peak-load protection |
| COD/BOD, TSS, pH, oil, nutrients, metals, and other process-relevant analyses | The roles of physical separation, biological treatment, and a WWTP chemical programme |
| Effluent target, reuse objective, and site requirements | Polishing, disinfection, monitoring, sample points, and performance-test criteria |
| Sludge production, residuals route, operators, power, space, and maintenance access | Sludge treatment, automation, layout, spares, training, and operating cost |
Review the industrial wastewater treatment service scope, then send influent data, flow, the effluent target, existing-unit condition, and project boundaries through the Beta contact page. A proposal should state its design envelope, interface responsibilities, and handover method before prices are compared.
biological
biological
High COD in Activated Sludge WWTP | Beta Pramesti Asia
High COD in activated sludge needs influent, biodegradability, aeration, SRT, RAS/WAS, toxicity, nutrients, clarifier, and effluent target diagnosis steps.
biological
Compact Sewage Treatment Plant | Beta Pramesti Asia
Betaqua compact sewage treatment plant with FRP tank and biological media. Send flow, load, effluent targets, utilities, site data, and project scope.
biological
Industrial Aerobic Wastewater System | Beta Pramesti
Industrial aerobic wastewater systems are selected from organic and nitrogen loads, flow, land, effluent targets, aeration, sludge, and operator capability.
biological
Industrial Anaerobic Wastewater System | Beta Pramesti
Industrial anaerobic wastewater systems are selected from organic load, biodegradability, flow, temperature, toxicity, effluent, gas, sludge, and operation.
biological
Betaqua Grease Trap
Our grease traps are the solution in separating and capturing grease before it enters the sanitary system in commercial kitchens and water treatment facilities so as not to damage the piping system.
biological
Biological Wastewater Programme | Beta Pramesti Asia
Industrial biological wastewater programmes for load, biomass, aeration, nutrient, and bioaugmentation diagnosis, verified by trends before dose changes.
biological
Industrial Wastewater DAF Selection | Beta Pramesti
Industrial wastewater DAF separates TSS, oil, grease, and light floc. Select it from flotation tests, solids load, chemistry, recycle, and sludge data.
biological
Fix Bed Bio Reactor
Fixed Bed Bio Reactor (FBBR) is a type of bioreactor used for wastewater treatment and bioproduct production (e.g. biogas or microbial biomass).
biological
Fixed Bed Bio Reactor
Fixed Bed Bio Reactor for industrial water treatment, wastewater treatment, process water, and chemical programs in Indonesia with Beta Pramesti Asia.
biological
MBBR Chips Selection for WWTP | Beta Pramesti
Select MBBR chips for WWTP duty from BOD load, ammonia, fill ratio, media-retention screen, aeration, mixing, start-up, and trial proof.
biological
MBBR Chips
MBBR Chips are specially designed to increase biological efficiency offering a solution that is not only effective but also environmentally friendly.
biological
Membrane Bioreactor (MBR) for WWTP | Beta Pramesti Asia
An MBR combines biological treatment with membrane solids separation. Compare design data, pretreatment, fouling risks, utility and procurement scope.
biological
Moving Bed Bioreactor (MBBR) System | Beta Pramesti Asia
Moving bed bioreactor (MBBR) system for industrial wastewater: compare carrier data, retrofit scope, aeration, COD-ammonia loads, and effluent target.
biological
Industrial WWTP Nutrient Removal | Beta Pramesti Asia
Industrial WWTP nutrient removal controls nitrogen and phosphorus through biological or chemical processes selected from load, fractions, and targets.
biological
Pentair Aquaflex UF Membranes
Pentair X-Flow Aquaflex Solution helps address challenging surface water, groundwater, seawater and wastewater treatment requirements.
biological
Sequence Batch Reactor for WWTP | Beta Pramesti Asia
Sequence Batch Reactor for industrial WWTPs is selected from flow, load, equalisation, cycles, aeration, settling, decanters, effluent, and operation.
biological
Stainless Plate Settler
Stainless plate settler is a device or separation unit used in water or wastewater treatment processes, mainly to separate suspended solids from liquids by.
physical separation
physical separation
Automatic Bar Screen for WWTP | Beta Pramesti Asia
Select an automatic bar screen for an industrial WWTP by peak flow, opening, solids, headloss, rake control, bypass, residual handling and site tests.
physical separation
Sludge Dewatering Screw Press | Beta Pramesti Asia
Sludge dewatering screw press chosen by dry-solids load, sludge tests, polymer response, cake targets, filtrate quality, utilities, and disposal plan.
physical separation
Grease Trap Commercial Kitchens | Beta Pramesti Asia
Grease traps for commercial kitchens separate fats and oils before drainage. Select capacity, cleaning access, and wastewater-treatment needs with Beta.
physical separation
Manual WWTP Screen Selection & Acceptance | Beta Pramesti
Select a manual WWTP screen from flow, debris, bar opening, operator access, bypass and residue handling, then prove hydraulic capacity at acceptance.
physical separation
Industrial Wastewater Oil Removal | Beta Pramesti Asia
Industrial wastewater oil removal for free and emulsified oil, selecting gravity separation, DAF, chemistry, polishing, and measurable sludge handling.
physical separation
Industrial Wastewater Physical Separation | Beta Pramesti
Select an industrial wastewater physical-separation train from screening, grit removal, sedimentation, DAF, loading evidence, and downstream treatment targets.
consumables
consumables
Bio Grease Remover for Wastewater FOG | Beta Pramesti
Bio grease remover supports fat, oil, odour, grease-trap, and wastewater-drain control using actual FOG sources and operating-condition evidence on site.
consumables
WWTP Bacteria & Bioaugmentation | Beta Pramesti Asia
WWTP bacteria and bioaugmentation for biological startup or recovery. Check load, toxicity, DO, pH, nutrients, sludge, cost, and field-trial evidence.
consumables
Industrial WWTP Bacterial Nutrients | Beta Pramesti
Industrial WWTP bacterial nutrients correct nitrogen, phosphorus, or micronutrient deficiency based on organic load, biomass condition, and effluent trends.
ancillaries
ancillaries
Compact Sewage Treatment Plant (STP) | Beta Pramesti Asia
Sewage treatment plant design for buildings, hotels, hospitals and estates. Compare flow, load, process, space, controls, commissioning and O&M scope.
ancillaries
Dissolved Air Flotation Systems | Beta Pramesti Asia
Dissolved air flotation (DAF) systems reduce TSS, fats, oils, and phosphorus in industrial wastewater through design data, jar tests, and commissioning.
ancillaries
Honeycomb Bio Media for Industrial WWTP | Beta Pramesti
Select honeycomb bio media for a WWTP from organic and ammonia load, media, flow, aeration, clogging risk, solids handling, test data, and acceptance criteria.
ancillaries
Levapor Foam MBBR for WWTP | Beta Pramesti
Evaluate Levapor Foam MBBR by wastewater load, adsorption, biofilm, shock load, media retention, aeration, cleaning, and pilot proof.
ancillaries
Plate Settler Selection & Proof | Beta Pramesti
Select a plate settler from flow, TSS, surface loading, plate spacing, sludge draw-off, cleaning access, material, and acceptance tests.
ancillaries
WWTP Tube Settler Selection & Acceptance | Beta Pramesti
Select a WWTP tube settler from settling tests, flow, solids load, distribution, sludge removal, cleaning access, materials, and acceptance targets on site.